OEMDRV is Default OS Development Drive created by lifecycle controller of Dell Servers and contains the drivers used while installing the server.
In our case OEMDRV was E: and we wanted to use that drive letter to install some of our softwares, we were also unable change the drive letter or eject/delete it using disk management though the drive gets automatically removed after 18 hours and we did not wanted to wait that long in order to complete the server setup at the earliest..
But there is another way to force remove the volume, simply enter and exit the lifecycle controller during boot.
Restart the server and Press F10 to enter lifecycle controller during the time of boot and simply exit it (no need to change any settings).
What is Samba?
Samba is program which allows end users to access and use file, printers and other shared resources over a network. Shared resources can also be accessed by other operating systems like Windows or Mac.
In this Guide we will be installing and configuring samba on Ubuntu server to access a folder through windows and mac.
Requirements Ubuntu 16.04 or higherLocal area network to access files across.
If you have all the things ready, let's begin.
Installing Samba Before installing samba we will make sure all our repositories are update by using command below sudo apt update
Once the update is completed successfully we will be ready to install samba by using
sudo apt install samba
Optional: To check if the installation of samba is successful or not we can use the command
It should give you the following output samba: /usr/sbin/samba /usr/lib/samba /etc/samba /usr/share/samba /usr/share/man/man7/samba.7.gz /usr/share/man/man8/samba.8.gzCreating directory and setting…